Car Dent Repair Tools Auto Paintless Body Dent Removal Kits Automotive Dent Remover Suction Cup Dent Puller Tool Kit for Car

【Kit 3】
Package included:
7 x Pulling bridge set

【Kit 4-58Pcs】
Package included:
12x Red Tabs
28x Blue Tabs
1x Gold Puller
2x Shovel
1x Glue Gun(US/EU Plug,20W)
5x White Glue Sticker(7*270mm)
5x Yellow Glue Sticks(7*270mm)
1x Towel
1x Alcohol Bottle(Alcohol  not included)
1x Tools bag
1x The Instruction

【Kit 5-76Pcs】
Package included:
12x Red Tabs
28x Blue Tabs
1x Gold Puller
2x Shovel
1x Glue Gun(US/EU Plug,20W)
5x White Glue Sticker(7*270mm)
5x Yellow Glue Sticks(7*270mm)
1x Towel
1x Alcohol Bottle(Alcohol  not included)
1x Hammer
10x Knocking pen
1x Tools bag
1x The Instruction
7 x Pulling bridge set

How to use the tools ?
1. Clean damage surface with a clean wet cloth;
2. Put the glue stick to gun and connect the power source and preheat for 5-10 minutes;
3. Pull the trigger and apply the suitable drawing gasket with extruded glue (The 4 holes of gasket should be applied with hot melt glue);)(Note: The larger the drawing gasket is, the larger the drawing force is);
4. Immediately place the drawing gasket with hot melt glue in the center of the dent and hold until sticks (Let the glue cool for about 5-8 minutes. The cooling time should be less than 10 minutes and should be shorter slightly in winter);
5. Align the T-shaped repairer and press the drawing gasket with hot melt glue, pull the sliding rod backwards to pull up the dent;
6. When dent was removal, clear the glue by alcohol with plastic shovel;
7. If dent still exists, knock it slightly with a flattening hammer with Tapdown head 
8.Repeat the operation steps above until the dents are repaired.